topstek ac current sensor TU16P-150A - 119 - www.topstek.com TU16P-150A v080201 7/1/2008 standard terminal TU16P-150A features and applications accurate ac current monitoring/measuring device fast clamp-on application on existing switchboard wire excellent linearity of the output voltage over a wide input range ferrite core ensuring fast response time and low phase lag excellent frequency response (50 ~ 150 khz) for accurate rms measurement without dc component wide measurement range (10ma ~ 150amp ac) good linearity for low current (10ma ~ 1a) detection secondary coil equipped with two 7.5v surge suppression diodes for equipment protection and provide linear output up to 15.6vp-p or 5.5vrms high voltage isolation between measuring circuit and current-carrying conductor (1000v 60hz ac) extended operating temperature range -20c to 50c flame-retardant plastic case using ul classified materials all materials used are rohs compliant ac current sensor/current transducer applications like power meter current detectors or equipment over current protection circuits specifications parameter TU16P-150A rated input current range 10ma rms ~150a rms (50hz/60hz) max continuous current 300a rms linear output range 15.6v p-p or 5.5v rms working frequency range 50hz~150khz no. of secondary turns 30002 secondary coil resistance 28020 secondary surge voltage clamping 2(two) 7.5v diodes dielectric strength ac 1kv 60sec isolation resistance >100m @ 500vdc operating temperature -20c to 50c storage temperat ure -30c to 90c case material ul94v0 nylon 66 terminals (standard) ul 1017 awg22, length:15010mm terminals (option y) ul 1017 awg18 wire, length:300050mm two y4.3 terminals with pvc tube mating output connector jst smp-02v-bc approximate weight 68g equivalent circuit diagram dimensions and pin identification all dimensions in mm 0.2, holes C0, +0.2 except otherwise noted. option y terminal
|
